drilling books
drilling today subscribe
the water well drilling industries  
HOME | ABOUT US | ADVERTISE IN MAGAZINE | BOARD | EDITOR’S DESK | MEDIA KIT

drilling bits
 
Bulroc Dth Drilling
dth products
numa hammers
mincon rockdrills
hi-tech
sai deepa rock drill

Getech Industries
 
India Mark II
 

India Mark – II handpump is divided into four main assemblies

Head Assembly

Pump Head Assembly (above ground mechanism) consists of Head with Inspection cover, Third plate, Handle, Water chamber and stand.

Cylinder Assembly

Cast Iron Body painted outside and lined from inside with seamless Brass liner at 63.5mm I.D., Gun-metal valve components and Nitrile rubber components. Discharge capacity is 15 liters @ 40 strokes per min.

Connecting Rod

12mm dia mild steel electro galvanized, in three meter lengths with hexagonal coupling of both the ends.

Riser Pipe (Drop Pipe)

32mm N.B., G.I. Medium pipe in three meters length with a socket at one end.

Installation

Simple Installation of India Mark-II Handpump, when installed properly, gives very long uninterrupted service. For step installation procedure and other details, please refer to our installation and Maintenance Manual.

Salient Features of INDIA MARK – II Handpump
  • Suitable for borewell installation with static water levels upto 45 mtrs.
  • The entire above ground components are fabricated out of steel sections hence they are strong and study.
  • The pump Body is hot-dipped galvanized hence corrosion proof.
  • Handle is designed for ease of operation.
  • Pre-greased sealed Ball Bearings add to the ease of operation and elimination of greasing during use.
  • The Spout design ensures collection of water in any type pf vessel normally used.
  • Pedestal Design ensures the bore hole is sealed to prevent water source contamination.
  • Cylinder with highly polished brass liner ensures long life of Nitrile Rubber Pump Bucket.
  • The Rubber parts in the cylinder are nontoxic and hence they course no health hazards.
  • All internal parts of the cylinder are made of Gunmetal to ensure long life.
  • These pumps can be easily adopted for Shallow Well, Windmill and Motonised operations with minor modifications.
  • India Mark – II pump works on the positive displacement principle, hence the discharge remains constant irrespective of the depth of bore.

 

 
 
CONTACT DETAILS
Plot No. 194/3&4, Phase II Cherlapally Industrial Area HCL Post, Hyderabad 500051
AndhraPradesh, INDIA
Key Personnel
Ms Geetha V Nair
Chief Excutive Officer
Mobile:+91-9391669448,9441031720
Phone:++91-40-27261332
Fax:+91-40-27261331
   
 
 
www.drillingrigs.co.in | www.dthhammers.net | www.mudpump.co.in | www.drillrods.net | www.dthbuttonbits.net | www.rockdrillhoses.com | www.submersiblepumpsandmotors.com | www.drillingaircompressors.com | www.drillingoperators.com | www.drillingrigsforsale.in | www.rotarydrillingrigs.com | www.downthehole.in | www.waterwelldrillingrigs.com | www.useddrillingrigs.co.in | www.dthdrillingrigs.com