| Technical Specifications of KLR DTH Drill
Rigs Standard Models |
| KLR Drill Rigs Standard Models |
| Standard Models |
KLR-1000 |
KLR-2000 |
| 1. Capacity |
6’’-6.5’’ |
8’’-10’’ |
| A) Drilling Diameter |
152 mm-165 mm |
203 mm-254 mm |
| B) Drilling Mode |
DTH |
DTH/Rotary (Air/Mud) |
2. Hydraulic Power Pack
Prime Mover |
Truck Engine (or) Separate Deck Engine |
Truck Engine (or) Separate Deck Engine |
| Rotation Speed (Max) |
0 to 100 |
0 to 100 |
| Truck (Max) |
|
345 kgm. 600 kgm. |
| Feed System: |
| Pull Up Force (Max.) |
7500 kgf. |
11730 kgf. |
| Pull Down Force (Max.) |
5200 kgf. |
8020 kgf. |
| Rapid Speed (up) |
24 m/min. |
24 m/min. |
| 3. Hydraulic System pump |
Gear/Van Type |
Gear/Van Type |
| Reservoir Capacity |
300 ltrs. |
400 ltrs. |
| 4. Levelling Jacks |
4 Nos. |
4 Nos. |
| Stroke Length |
610 mm. |
610 mm. |
5. Bottom Guide
Opening Standard |
270 mm. |
330 mm. |
| 6. Mast Suitable for Rod/ Cassing
Handling |
6 mtrs. |
6 mtrs. |
| 7. Water Injection Pump |
| Flow Max. |
36 lpm. |
55 lpm. |
| Pressure |
425 psi. |
600 psi. |
| 8. Air Line Lubricator |
Venturi Type |
Venturi Type |
| Max. Pressure |
450 psi. |
450 psi. |
| 9. Oil Cooler Type |
Hydraulic Driven
Fin Type Oil to Air |
Hydraulic Driven
Fin Type Oil to Air |
| Options: |
* Winch, Rod Changer & Jib Hoist
*
Two Speed Hydraulic switch over Rotary Head
* Combination
Rotary Head for DTH, Rotary & Core Drilling
* 5T heavy
duty hoist
* Mud Pump-Engine or Hydraulic Driven
*
Night Lights
* Welding Generator-Engine or Hydraulic
Driven |
KLR-2000 requires higher capacity engine
for providing
Hydraulic
Drive
for Mud Pump |
